Loaded with a 12" Celestion coaxial loudspeaker integrating a 1" compression driver. Powerful, deep and percussive low end. Detailed and dynamic high mids.
Contrarily to any standard tweeter - and especially low-end piezo tweeters -, the Single12COAX' coaxial compression driver provides a very detailed high-mid frequency response while a standard tweeter would only provide additional definition to high frequencies highlighting screeching strings, pops and other type of noises, without adding any definition neither to the high strings nor to their harmonics.
The cabinet is manufactured with high quality Poplar wood sourced exclusively from sustainable forests (PEFC certified wood).
Internal cab damping: recycled coton wool.
Eight black metal corner protectors.
Two large metal side handles.
Entirely hand assembled in France.
The Single12 can be used with any bass amplifier head which output power can be limited to 300 Watt RMS over 8 Ohm.
This version (P/N: Single12COAXPL) is sold as a pack with a 06B400BHL 2 x 100 Watt mini bass amplifier head. Compared with the 06B400BH, the 06B400BHL adds a 1/8" (3.5mm) jack line output.
Note: the 06B400BHL bass amplifier head can be powered with a 7S35V1 intelligent LiPo battery pack (sold separately. Please check the accessories section of our web store for details). In complete freedom of any mains power connection one is then empowered to play over 10 hours at full power with one Single12COAX cab and over 5 hours at full power with two cabs.
06B400BHL mini amplifier head's technical data:
Two 100 Watt R.M.S. over 8 Ohm amplifier channels (2 x 50 Watt R.M.S. over 16 Ohm)
Settings: one volume potentiometer and a 3 band equalizer
Inputs / Outputs: one 1/4" jack input, one 1/8" jack line output and two loudspeaker outputs
Amplifier efficiency: >93%
Amplifier THD (1W/1kHz): <0,07%
Amplifier SNR (1kHz at max. power): 80 dB
Nominal DC voltage supply: 35 Volt
Power consumption in stand-by mode: 1.5 Watt max.
Max. operating temperature: 40 Celsius
Frequency response: 20 - 20000 Hz
Dimensions of the mini amplifier head: 4.7 x 4.7 x 1.8 inches (120 x 120 x 45 mm)
Weight of the mini amplifier head: 1 Lb. / 450 g