A unique size vs. power ratio.
Top quality electronics:
- The renowned electronic digital amplifier circuit used has been selected through numerous hours of listening tests
- Very careful electronic schematic design and implementation
- No stiff cost optimization which would have leaded to using low quality components and over simplifying the electronic schematic
- Highly optimized power supply blocks with numerous independent regulation stages and many LC filtering stages
Simplicity best serves sound quality: This product's features have been voluntarily limited to prevent too many / too complex electronic stages from altering sound quality and raising power consumption (Cf. company's environment charter).
The sound is both warm and very detailed as with a tube amplifier head...but in a much smaller form factor !
Dimensions: 4.7 x 4.7 x 1.8 inches (120 x 120 x 45 mm)Ultra light weight: 1 Lb. (450 g) only !
Two 100 Watt R.M.S. over 8 Ohms amplifier channels (2 x 50 Watts R.M.S. over 16 Ohms)
Settings: one volume potentiometer and a 3 band equalizer.
Inputs/Ouputs: one 1/4" jack input and two loudspeaker outputs.
Amplifier THD (1W/1kHz): <0,07%
Amplifier SNR (1kHz at max. power): 80 dB
Nominal DC voltage supply: 35 Volts
Power consumption in stand-by mode: 1,5 Watts max.
Max. operating temperature: 40 degrés Celsius
Frequency response: 20-20000 Hz
Auto-switch power supply allows operation over 100 to 240 Volts (50/60Hz).
Product sold with two specific loudspeaker cables equiped with either 1/4" (6.35mm) output jacks or Speakon connectors (please select préferred option on the top left side of this page). Cables' length: 2.5 feet (75cm).
Important notice: this product is a Power Amp and requires an external preamplifier.